A.P. Lawrence

This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open Desktop or Openserver.

There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

Serial Communications and UUCP

Why can't I get my dialin modem to work above 9600 baud?

Because you need the modem speed in /etc/inittab to match the DTE rate that the modem is set for. If the DTE rate is fixed, the modem can connect with another modem at any speed. See /Unixart/hispeed.htmli for a full description of how to do this, but the overall picture is this:

• The tty device (lowercase version) should be owned by uucp.
• You need AT LEAST a Direct entry in /usr/lib/uucp/Devices referencing that device.
• You may optionally have an ACU entry referring to the Upper case version: if you do, put that BEFORE the Direct entry.
• In either case, make sure the speed entry matches the speed you will use in inittab.
• Enable the Uppercase version in /etc/inittab at a fixed baud: do not use a cycling baud rate.
• cu to the lower case version at the speed desired and issue whatever command is required to force the DTE rate to that speed.

Psst - Wanna work for yourself?

Comments


Add your comments

Why no "Digg this!" etc.?

Lone-Tar Backup and Disaster Recovery
for Linux and Unix

Enter your email address for automatic notification of new posts here
(be sure to whitelist 'feedburner.com' if you use spam filtering)

/SCOFAQ/FAQ_scotec5dtespeed.html copyright 1997-2003 (various) All Rights Reserved

Have you tried Searching this site?

Unix/Linux/Mac OS X support by phone, email or on-site: Support Rates

This is a Unix/Linux resource website. It contains technical articles about Unix, Linux and general computing related subjects, opinion, news, help files, how-to's, tutorials and more. We appreciate comments and article submissions.

Publishing your articles here