A.P. Lawrence

This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open Desktop or Openserver.

There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

Serial Communications and UUCP

What are all the V.something codes, MNP, HST, etc.?

Here are the most common data modem signalling standards. Note that the descriptions are not complete technical descriptions, and only cover the major feature of the standard (i.e. no discussion is made of fallback data rates etc.)

• Bell 103 - North American 0-300 bps
• Bell 212A - North American 1200 bps
• V.22 - International 1200 bps; not generally used in North America
• V.22bis - 2400 bps
• V.32 - 4800 & 9600 bps
• V.32bis - 4800 - 14 400 bps
• V.32terbo - Vendor standard (no formal recognition), 16.8 & 19.2 kbps
• V.FC - Vendor standard (no formal recognition), up to 28.8 kbps
• V.34 - International standard, up to 28.8 kbps; this has been extended to 33.6 kbps
• HST - USRobotics' proprietary High-Speed Transfer, 9600 - 16 800 bps
• PEP - Telebit's proprietary standard; also Turbo PEP
• X2 - USRobotics' asymmetrical high-speed modulation; up to 56 kbps downstream (limited to 53.3 kbps by legislation), V.34 upstream. See http://x2.usr.com/
• K56flex - same idea as X2, different implementation

There are also numerous standard for error correction and data transmission. MNP (Microcom Networking Protocol) is a family of protocols with various levels. MNP levels 1 through 4 denote error correction schemes of increasing sophistication. MNP level 4 is the most common MNP error correction level; while there are higher levels, they are not terribly widespread. You may never see your modem report an MNP level 4 connection if you have data compression enabled; it will report level 5 instead. MNP level 5 is usually considered a 2:1 compressor, meaning that it will generally compress your data by up to a factor of 2 (though it can exceed this on some data and not reach it on other data). Note that it does not check to ensure that it can actually compress the data; if you send precompressed data through it, it will actually increase the amount of data which must be transferred between modems, thereby decreasing throughput.

V.42 is another error correction standard; unlike MNP, it is non-proprietary. Its primary error-control protocol is called LAP-M. It also includes a provision for falling back to MNP level 4 error correction should the remote modem not support V.42. V.42bis is the corresponding data compression standard. It is both more efficient than MNP level 5, providing up to a 4:1 rate (even higher on particularly repetitive data), and more intelligent, in that it can recognize whether or not it can compress data and send the data uncompressed if this makes the most sense.

For further information on modems, see the newsgroup comp.dcom.modems.

Psst - Wanna work for yourself?

Comments


Add your comments

Why no "Digg this!" etc.?

Enter your email address for automatic notification of new posts here
(be sure to whitelist 'feedburner.com' if you use spam filtering)

/SCOFAQ/FAQ_scotec5ITU_T.html copyright 1997-2003 (various) All Rights Reserved

Have you tried Searching this site?

Unix/Linux/Mac OS X support by phone, email or on-site: Support Rates

This is a Unix/Linux resource website. It contains technical articles about Unix, Linux and general computing related subjects, opinion, news, help files, how-to's, tutorials and more. We appreciate comments and article submissions.

Publishing your articles here